20 Sep How to Lay Bricks for a Wall | The Do-It-Yourself Route
Want to make some noticeable home improvements? Then, laying bricks can be one of your stellar options! However, this comes with a price.
Bricklaying in the United Kingdom cost £19.50 per hour, depending on the expertise of the bricklayer. But, if you’re willing to go DIY, you can save some of your hard-earned cash. To start this route, lay out bricks on both ends of your walls, mix mortar and spread it to the areas where you intend to put your bricks, make a trench in the mortar and so on.
There are many bricks for sale that you can choose from your wall project, like the engineering bricks and purple bricks. Due to high demand, there are several types of purple bricks for sale in the market today.
Moving on, you may use the comprehensive guide on how to lay bricks for your wall below.
Things You’ll Need in Building a Brick Wall:
- Brick/string line
- Club hammer
- Brick trowel
- Old board
- Tape measure
- Spirit level
- Stiff brush
Step-by-Step Guide in Laying Bricks for a Wall
Laying bricks may not sound so complicated. However, one small mistake can affect the outcome of your desired brick wall.
Thus, we made a guide that’s easy to understand and follow for those who want to lay bricks for their wall by themselves. Consider following the given steps below and get thrilled with your finished wall made of bricks after!
Step #1: Lay out the Bricks at Both Ends of Your Wall
- The first thing you need to do is to start at the corners of your brick wall.
- Lay bricks at both ends.
- Use the string line as a guide in making a straight line at the brick height between the two external bricks.
Step #2: Mix the Mortar
- Load five shovels of sand and one shovel of cement on a board.
- Mix them using the shovel until they’re even in colour.
- Make a centre hollow and pour in the water, and mix together. Repeat this process until you get a smooth texture.
Step #3: Place the First Course of Bedding Mortar
After you’ve thoroughly mixed the mortar, follow the steps given below:
- Lay 1-2 centimetres of the mortar bed along the string line.
- Start at the one end and lay the first brick. Tap slightly to set in.
- Next, Butter up the one end of the succeeding brick with the mortar and join it to the first one. Repeat this step using the string line as your guide.
Step #4: Start Building Your Brick Wall
After laying the mortar, the next thing you should do is lay down the first row of your bricks.
- Lay the first brick cautiously on one end of the mortar spread.
- Then, push the brick evenly until you get your desired joint diameter.
- After that, lay down the succeeding bricks and final courses of bricks using the same techniques above.
- Ensure to stagger the bricks for extra strength.
- Create a vertical joint by adding mortar to the end of the brick.
- Make sure to level the brick on top just like the previous ones.
Step #5: Cut the Bricks
In building pillars, some courses will require you to lay only half of the brick. To make the required cut, do the following:
- Put the brick on its side.
- Locate the bolster at the cutting point.
- Hit the head securely using a club hammer.
- Make sure the cut is clean and done at the first attempt.
Step #6: Keep the Pillars Course Higher
In making your brick wall, always make sure that you keep the pillars courses higher. This adds strength and beauty to your wall, as well as supporting a heavy load.
- Ensure to move the string line up when you build, embedding it into the mortar on pillars.
- For a stretcher bond, the end of each brick should be overhead the centre of the one underneath.
Step #7: Add Coping Stone on Top of the Pillars
When you reach the top of your pillars, add coping stones. Coping stones protect your brick walls from the potential damage caused by harsh weather.
They also come complete with drip checks, ensuring to keep water away from your wall. They also make a striking effect at a lesser cost by bedding bricks into the mortar on their sides.
Step #8: Remove Excess Mortar
Congrats! You’re finally at the last step.
- Get a rounded edge of a brick jointer and scrape mortar into the joints.
- Then, give the finished brick wall a gentle brush and clean up the mortar residues that have fallen into the floor before they get dried up.
- Lastly, enjoy your new wall brick!
Building a brick wall can be a manageable task if you’ve got the patience and the will to complete the project. This way, you can save the money meant to pay for the wage of the bricklayer.
You’ll also enjoy searching for the best bricks available online for any of your brick projects. However, if you’re unsure of taking on the brick wall project, you can always hire the best local bricklayer in your area to get that brick wall you’ve always wanted to have!